产品中心
石河子TRAIS UR750 Dual-channel True Diversity Wireless Performance Microphone
产品描述
TRAIS UR750 Dual-channel True Diversity Wireless Performance Microphone
Product Features:
● Application Type: Small and medium-sized stage performances, multi-function halls, etc.;
1. Adopting advanced digital pilot technology, stable PLL phase-locked oscillation circuit, combined with "noise detection" mute control function, can effectively block the noisy radio frequency interference in the environment;
2. True diversity four-way antenna system, single-channel AB intelligent reception, effectively enhance dead point handling, achieve continuous frequency reception over long distances, can cope with various complex performance environments;
3. System 50KHz step design, manual frequency adjustment allows up to 100 frequency points per single channel to be adjustable, a total of 200 frequency options for dual channels, enabling you to adjust the frequency more precisely and increase the frequency utilization rate;
4. All series products adopt full-color high-definition 2.0-inch TFT display, dual-color display settings, capable of displaying orange and green;
5. The system has real-time sweep frequency function, full-band scanning search for frequencies, can detect the on-site environment and display the existing frequencies and intensities in the space, can intuitively select clean working frequencies in the spectrum, making frequency adjustment visualized and more intuitive and accurate;
6. The receiver has 30 levels of audio output gain options, which can be selected according to the on-site requirements for the appropriate audio output volume;
7. The host has dual-band dual-mode function, can be switched to another frequency point with one click, can be set as handheld, waist bag, conference, making it easier and more convenient to use.
◆ Wireless Receiver
Technical Specifications:
Case Specification: EIA standard 1U
Channel Group Number: Dual channels
Frequency Stability: ± 0.5%, PLL phase-locked loop circuit frequency control
Carrier Frequency Band: UHF 640--690 MHz
Frequency Step: 50k
Channel Number: 100 + 100 frequency points
Effective Application Distance: 200 meters (in open areas without obstacles and interference)
Oscillation Mode: PLL phase-locked loop circuit frequency control
Receiving Sensitivity: -88dbm
Bandwidth: 50MHz
Maximum Distortion-Free Input Signal (1KHz): 438mVpp
Maximum Offset: ±45KHz
Overall S/N Ratio: ≥78dB
Overall T.H.D.: <0.5% @ 1KHz
Overall Frequency Response: 30Hz~18KHz ± 3dB
Audio Output: 2 (XLR) balanced outputs and one Φ6.35 socket unbalanced output
Power Supply: Input AC 110~240V (50~60Hz) Output DC 12V 1A
Operating Current: <380mA
◆ Wireless Handheld Microphone
It is equipped with a multi-directional transmitting antenna for stable system transmission; according to professional performance standards, using 2 AA batteries can meet a working duration of over 10 hours; it has 5 gain adjustment levels and can switch between high and low power.
It uses the UHF 640-690 MHz carrier frequency band.
It adopts a dynamic coil type cardioid directional pickup head design, featuring high fidelity voice and the most stable characteristics of professional quality.
It can be used with all models of Shure or SE microphones.
Technical Specifications:
Carrier Frequency Band: UHF 640-690 MHz
Oscillation Mode: PLL Phase-Locked Loop Frequency Synthesis
Harmonic Radiation: < -65 dBm
Frequency Synchronization Method: Infrared Synchronization
Bandwidth: 50 MHz
Maximum Offset Degree: ±48 kHz
Sound Pickup Sensitivity: 5 levels adjustable
Sound Pickup Method: Dynamic Coil Type/Heart-shaped Directional (Capacitive Microphone can be selected)
Transmission Power: 5 dBm - 10 dBm (Approximately 3.2 mW - 10 mW) selectable
Current Consumption (3V Power Supply): Low Power 85 mA (Typical), High Power 122 mA (Typical)
Battery Specifications: 2 × 1.5V AA Batteries
