PRODUCTS CENTER
Hungary TRAIS FD8PRO Wireless Microphone Signal Antenna Amplifier
Category:
HungaryAntenna Amplifier
Product Description
TRAIS FD8PRO Wireless Microphone Signal Antenna Amplifier
● The multi-function antenna distribution system is equipped with gain indication, RF overload indication, and 12V output indication.
● The TFT color screen provides intuitive and real-time display of the working status of two antennas and RF signals, facilitating convenient monitoring for installation and debugging.
● The 10-channel antenna distribution system allows up to 10 signals to share 4 antennas, enabling the sharing of RF signals among 4 antennas for multiple wireless receivers, expanding the wireless microphone system. It can also amplify the RF signal, with 31 levels of gain adjustable, compensating for insertion loss caused by distributing the signal to multiple output ports.
● The cascading connector can connect wireless receivers or a second antenna distribution system to achieve RF signal expansion. It is also equipped with a 12V power connector for timing distribution to 5 receivers and indicating.
● The multi-function antenna distribution system ensures maximum sensitivity and signal processing capability, providing the widest range of radio frequencies for numerous wireless receivers.
● Low noise and intermodulation distortion The multi-function antenna distribution system maintains clear signals and has the lowest distortion.
● Insertion loss compensation, 31 levels of gain adjustable. When the signal is split to multiple output ports, the signal strength will be attenuated.
● The antenna distribution system can compensate for signal amplification to ensure suitable signals are provided to wireless receivers.
● RF power indication, overload, the red "OVER LOAD" flashing indicates the on-board DC output LED dual-color indicator light turns on 2 seconds after startup, 1#~5# DC connectors are sequentially turned on at 1.5 seconds intervals, the orange indicator light is sequentially lit, and when a DC line is inserted into the connector, the corresponding orange light turns green.
● Expansion capability, cascading ports The multi-function antenna distribution system is specifically designed for large wireless receiving systems, allowing 5 wireless receivers to share 4 antennas.
● Two BNC-type cascading ports can connect another antenna distribution unit or wireless receiver.
● The large wireless system can operate when multiple antennas share RF signals.
● Compatibility The multi-function antenna distribution system is compatible with all wireless receivers operating within the compatible frequency range.
Product features
● The gain of level 31 can be adjusted. The TFT true-color screen provides intuitive display of signal strength, with a 4-antenna dual-channel 10-channel design, offering a wider radio reception range and enabling full coverage of the performance venue (each channel can connect two blades, and a total of 4 blades can be connected, allowing for multi-angle signal reception)
● The all-copper-gold BNC connector ensures more stable signal
● 5 DC12V output connectors, with sequential output for 1 to 5 connectors to avoid overcurrent protection when distributing power simultaneously
● With anti-misoperation buttons, the host parameters can only be operated after unlocking
● With a flywheel knob for operation, the host gain parameters can be adjusted
Host technical parameters
● Frequency range: 450~970 MHz
● Output level (gain) of the distributor: -24dB to +6dB adjustable
● Connector type: BNC, impedance: 50Ω
● Signal isolation of output connectors: >30dB, typical
● RF signal over-excitation indicator threshold (±2 dB): 5 dB
● DC output: DC 12 V, 5 sequential DC output connectors, maximum total current 5A (with 3C certification)
● Appearance size: 480 x 210 x 45mm
Blade technical parameters:
● 1.3-inch TFT true-color screen display
● Frequency range: 450 MHz to 970 MHz
● Reception angle: 70°
● Gain: -18dB to +12dB
● Interface: BNC
● Impedance: 50Ω
● Voltage: 9~12V
